Ciężarówka używana volvo fh 500 - falkom faw 25.000 - !! viewing by appointment only !! olej napędowy

Cena sprzedaży :

Cena na żądanie

Powrót do wyszukiwania

Ciężarówka Volvo 500 - FALKOM FAW 25.000 - !!...

Nr ref: HE-NE

Ciężarówka używana Volvo FH 500 - FALKOM FAW 25.000 - !! Viewing by appointment only !! Olej napędowy

130 000 Km
37 Tony
03/01/2020
6004 RM Weert
Volvo Euro 6
Volvo

Informacje podstawowe
Ref. klienta :	HE-NE
Ref. na stronie :	11304821
Nadwozia	--
Marka	Volvo
Gama (marka : Volvo)	FH
Model	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Stan	Używany
Data pierwszej rejestracji	03/01/2020
Kraj	HOLANDIA
Konstruktor	Volvo

Informacje dodatkowe Volvo 500 - FALKOM FAW...
Data ostatniego przeglądu	03/01/2026
Koniec ważności kontroli technicznej	03/01/2027
Retarder hydrauliczny

Informacje dotyczące kabiny FH
Długość kabiny	Krótka

Skrzynia biegów
Skrzynia biegów	Automatyczna
Szczegóły dotyczące skrzyni biegów	Automaat

Tonaż
Ładowność	13.28 Tony
Masa własna	23.73 Tony
Rzeczywista masa całkowita	37 Tony

Wyposażenie Ciężarówka Volvo
Pneumatyczne zawieszenie Zawieszenie mechaniczne ABS Ogranicznik prędkości

Charakterystyka Volvo FH
Przebieg	130 000 km
Normy Euro	Volvo Euro 6
Kraj (gama)	HOLANDIA

Stan sprzętu
Rodzaj paliwa	Olej napędowy

Opony
Stan i rozmiar opon	22.5

Zawieszenie / Osie
Osie	8x4
Odległość między osiami	5.6 metry

Silnik
Pojemność silnika	12777 cm3
Liczba cylindrów	6
Moc silnika	375 kW
Moc	509 KM

Wyposażenie kabiny
Klimatyzacja Zamek centralny

Uwagi
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Zobacz wszystko

Uwagi

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

Falkom wrecker installation type FAW 25.000
- One main arm.
- A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m.
- A fully hydraulic installation consisting of:
- hoses
- couplings
- pipes
- 8-function valve block
- Two double-acting lifting cylinders take care of the up and down movement of the main arm.
- The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d.
- The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004).
- 2 anchors model working independently of each other standard.
- A lift beam (100 x 100 mm tube).
- Three sets of fork holders.
- 4 sets of V forks.
- 1 Set of chain forks.
- 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks).
- Set of Scania claws with mounting brackets on the lift beam.
- Set of air suspension forks.
- 1 bus frame.
- Tow bar mounted.
- Shovel and broom mounted.
- Oil tank.
- Pulling device with trawler in combination with a semi-trailer link.
- Supported drawbar coupling support.
- Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel.
- Hydraulic double pump.
- Radio remote control for all functions, excluding anchor shovels
- Complete installation is stacked / metallized.
- Built according to CE guidelines.
- Assembly of the air hands and electrical connections of the truck at the rear in the body.
- Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis.
- LED light bar mounted on the flyer.
- Lighting control switches mounted in the control box and in the cabin.
- LED flash lamps mounted at the rear.
- 6 work lights mounted (under the flyer, high at the rear and low).
- LED lamps mounted on the corners of the enclosure.
- Starting aid 12/24 volts.
- Air reel mounted.
- Spray the installation in finish.
- 7-wire electrical cable reel installed.
- Container for counterweight mounted behind the cab.
- Base plate for lateral stability (standard legs only)
- 2 fork raisers
- 2 pieces of anchor plates for Wheel chocks
- Two WLL 15 tonne folding discs
- European approved buffer beam at the rear.
- Pulling device with pin 40, 50 and 60 mm
- 2 models towing eyes.
- RDW inspection and, if necessary, TüV.
- Ballast under the bumper.

More information

Cab: Globetrotter, single
Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering
Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction
Registration number: 28-BPD-3

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

Kabine: Globetrotter, einfach
Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt
Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen
Kennzeichen: 28-BPD-3

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Cabine: Globetrotter, enkel
As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend
As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie
Kenteken: 28-BPD-3

Référence parc : 323949,
Année de construction : 2020,
Nombre de roues motrices : 4,
Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5,
Nombre d'essieux : 4,
Suspension d'essieu,
Stores,
Capacité : 13tonnes,
Capacité maximum : 13tonnes,
Prise de force,
Visière pare-soleil,
Charge utile : 13.275tonnes,
Autoradio,
Nombre de portes : 2,
Couchette chauffeur,
Poids : 23.725kg,
Frein à disque,
Vitres électriques,
Capacité de chargement : 13275kg,
Tempomat,
Cruise control,
Vitres électriques,
Type d'intérieur : Autre,
Type de pneus : Jumelés,
Couleur : Jaune

Zobacz wszystko

Uwagi
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Uwagi

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Historia pojazdu

Sprawdź historię pojazdu z

Cena sprzedaży

Cena na żądanie

Informacje podstawowe
Ref. klienta :	HE-NE
Ref. na stronie :	11304821
Nadwozia	--
Marka	Volvo
Gama (marka : Volvo)	FH
Model	500 - FALKOM FAW 25.000 - !! Viewing by appointment only !!
Stan	Używany
Data pierwszej rejestracji	03/01/2020
Kraj	HOLANDIA
Konstruktor	Volvo

Informacje dodatkowe Volvo 500 - FALKOM FAW...
Data ostatniego przeglądu	03/01/2026
Koniec ważności kontroli technicznej	03/01/2027
Retarder hydrauliczny

Informacje dotyczące kabiny FH
Długość kabiny	Krótka

Skrzynia biegów
Skrzynia biegów	Automatyczna
Szczegóły dotyczące skrzyni biegów	Automaat

Tonaż
Ładowność	13.28 Tony
Masa własna	23.73 Tony
Rzeczywista masa całkowita	37 Tony

Wyposażenie Ciężarówka Volvo
Pneumatyczne zawieszenie Zawieszenie mechaniczne ABS Ogranicznik prędkości

Charakterystyka Volvo FH
Przebieg	130 000 km
Normy Euro	Volvo Euro 6
Kraj (gama)	HOLANDIA

Stan sprzętu
Rodzaj paliwa	Olej napędowy

Opony
Stan i rozmiar opon	22.5

Zawieszenie / Osie
Osie	8x4
Odległość między osiami	5.6 metry

Silnik
Pojemność silnika	12777 cm3
Liczba cylindrów	6
Moc silnika	375 kW
Moc	509 KM

Wyposażenie kabiny
Klimatyzacja Zamek centralny

Uwagi
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune
Zobacz wszystko

Uwagi

🇬🇧 Information in English:
Additional options and accessories

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Remarks

More information

🇩🇪 Informationen auf Deutsch:
Weitere Optionen und Zubehör

Adaptive Cruise Control
Kühlschrank
Standheizung

Weitere Informationen

🇳🇱 Informatie in het Nederlands:
Aanvullende opties en accessoires

2 Bedden
Adaptive Cruise Control
Cabinezijfenders
Climate Control (ATC)
Elektrisch spiegels
Koelkast
Lane Change Support
Oliekoeler
SMART TACHO 2
Standkachel
Verstralers op het dak
Volvo Dynamic Steering
WhatsApp
Zwaailampen

Bijzonderheden

Meer informatie

Zobacz wszystko

Uwagi
🇬🇧 Information in English: Additional options and accessories 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Remarks Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. More information Cab: Globetrotter, single Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering Axle 3: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Axle 4: Tyre size: 315/70 R22.5; Differential lock; Max. axle load: 9500 kg; Reduction: hub reduction Registration number: 28-BPD-3 🇩🇪 Informationen auf Deutsch: Weitere Optionen und Zubehör Adaptive Cruise Control Kühlschrank Standheizung Weitere Informationen Kabine: Globetrotter, einfach Achse 1: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 2: Reifenmaß: 385/65 R22.5; Max. Achslast: 9000 kg; Gelenkt Achse 3: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Achse 4: Reifenmaß: 315/70 R22.5; Differenzialsperre; Max. Achslast: 9500 kg; Reduzierung: Ausenplanetenachsen Kennzeichen: 28-BPD-3 🇳🇱 Informatie in het Nederlands: Aanvullende opties en accessoires 2 Bedden Adaptive Cruise Control Cabinezijfenders Climate Control (ATC) Elektrisch spiegels Koelkast Lane Change Support Oliekoeler SMART TACHO 2 Standkachel Verstralers op het dak Volvo Dynamic Steering WhatsApp Zwaailampen Bijzonderheden Falkom wrecker installation type FAW 25.000 - One main arm. - A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m. - A fully hydraulic installation consisting of: - hoses - couplings - pipes - 8-function valve block - Two double-acting lifting cylinders take care of the up and down movement of the main arm. - The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d. - The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004). - 2 anchors model working independently of each other standard. - A lift beam (100 x 100 mm tube). - Three sets of fork holders. - 4 sets of V forks. - 1 Set of chain forks. - 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks). - Set of Scania claws with mounting brackets on the lift beam. - Set of air suspension forks. - 1 bus frame. - Tow bar mounted. - Shovel and broom mounted. - Oil tank. - Pulling device with trawler in combination with a semi-trailer link. - Supported drawbar coupling support. - Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel. - Hydraulic double pump. - Radio remote control for all functions, excluding anchor shovels - Complete installation is stacked / metallized. - Built according to CE guidelines. - Assembly of the air hands and electrical connections of the truck at the rear in the body. - Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis. - LED light bar mounted on the flyer. - Lighting control switches mounted in the control box and in the cabin. - LED flash lamps mounted at the rear. - 6 work lights mounted (under the flyer, high at the rear and low). - LED lamps mounted on the corners of the enclosure. - Starting aid 12/24 volts. - Air reel mounted. - Spray the installation in finish. - 7-wire electrical cable reel installed. - Container for counterweight mounted behind the cab. - Base plate for lateral stability (standard legs only) - 2 fork raisers - 2 pieces of anchor plates for Wheel chocks - Two WLL 15 tonne folding discs - European approved buffer beam at the rear. - Pulling device with pin 40, 50 and 60 mm - 2 models towing eyes. - RDW inspection and, if necessary, TüV. - Ballast under the bumper. Meer informatie Cabine: Globetrotter, enkel As 1: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 2: Bandenmaat: 385/65 R22.5; Max. aslast: 9000 kg; Meesturend As 3: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie As 4: Bandenmaat: 315/70 R22.5; Differentieelslot; Max. aslast: 9500 kg; Reductie: naafreductie Kenteken: 28-BPD-3 Référence parc : 323949, Année de construction : 2020, Nombre de roues motrices : 4, Informations pneus ou train de chaînes : Axle 1: Tyre size: 385/65 R22.5; Axle 2: Tyre size: 385/65 R22.5; Axle 3: Tyre size: 315/70 R22.5; Axle 4: Tyre size: 315/70 R22.5, Nombre d'essieux : 4, Suspension d'essieu, Stores, Capacité : 13tonnes, Capacité maximum : 13tonnes, Prise de force, Visière pare-soleil, Charge utile : 13.275tonnes, Autoradio, Nombre de portes : 2, Couchette chauffeur, Poids : 23.725kg, Frein à disque, Vitres électriques, Capacité de chargement : 13275kg, Tempomat, Cruise control, Vitres électriques, Type d'intérieur : Autre, Type de pneus : Jumelés, Couleur : Jaune

Uwagi

🇬🇧 Information in English:
Additional options and accessories